Brightside paint instructions

interlux pre-kote primer instructions
red polyurethane paintone-part polyurethane paint
interlux brightside primer
interlux brightside thinner
interlux brightside reviews
interlux brightside roll and tip

Apply 2-3 coats of Brightside following the proper dry times. Ventilation and Humidity Control It is best to paint on warm, dry mornings.When applying by brush a good technique is the 'Criss-Cross' method. Paint is applied to the surface with a diagonal brushing action from the left and right (1) Apply 2-3 coats of Brightside Paint, allowing a minimum of 16 hours between coats. · Sand between coats with 320-grit sandpaper. · Note: Avoid applying late in Apply 2-3 coats of Brightside® allowing a minimum of 16 hours between coats. Sand between coats with 320-grit sandpaper. Wipe Down: Brushing Liquid 333 Apply 2-3 coats of Brightside® Polyurethane following the proper dry times. Ventilation and Humidity Control It is best to paint on warm, dry mornings. A hard, high-gloss topside finish, Brightside® Polyurethane creates that sprayed-on look when applied by brush in thin coats. It can be used anywhere above