My Teaching House

Bringing the World Closer

Maximum portable chiller manual

 

 

MAXIMUM PORTABLE CHILLER MANUAL >> DOWNLOAD LINK

 


MAXIMUM PORTABLE CHILLER MANUAL >> READ ONLINE

 

 

 

 

 

 

 

 











 

 

adjusted with -1,5˚C to +1,5˚C maximum. Automatic overcharge shutdown: The chiller is equipped with an automatic overcharge shutdown safety feature. The chiller needs 3 minutes before it can be restarted after an automatic shutdown. The restart procedure will take about 1 minute. Automatic operation of the compressor: Please keep this manual readily accessible to operation and service personnel to ensure you get the most out of our product. If you have any questions about this model, or have other thernial solution needs, do not hesitate to call our Sales department (603-539-3600) or the 24/7 Service department (603- 539-5005). On board machine portable chillers are units for controlling the temperature of processes, they are cooled with water coming from an external cooling system (generally an adiabatic cooler). They consist of: Compact water - cooled chiller, sized for the maximum cooling capacity required by the process and complete with tank and recirculation pump. Warranty 5 year parts on standard controller, lifetime $175 exchange 3 year parts on the optional premium PLC controller 18 months parts on entire unit 1 year labor Based on $0.10/kWHr power cost Variable-Speed Compressor Options Chillers usually operate with process heat loads less than 100% of available chiller capacity. Chillers 3HP and up are not available outside of the United States. 1.5 HP High Capacity Chillers. 3HP High Capacity Chillers. Key Specifications. Working Temperature: +5° to +35°C Temperature Stability: ±0.5°C Cooling Capacity: Up to 10,936 watts @ 20°C. Key Features • Chillers 3HP and up are not available outside of the United States 4 to 40 ton NQ Series industrial portable chillers use components such as scroll compressors, microchannel condensers, low noise fans, stainless steel brazed plate evaporators, and NQ Series PLC controls with large color touch screens to provide the best available technologies for the ultimate performance and reliability in a chiller package. The Broadest Range of Chillers Available on the Market Today Available in a variety of configurations from 5 to 60 tons of cooling capacity. Available as water-cooled, air-cooled, or remote air-cooled units. Intuitive Controls Simplify the operation while maximizing the unit efficiency. The maximum communications distance for Chillers equipped with the RS232 option is 15 meters (50 feet). A 9-pin D-connector is provided on the rear of the instrument enclosure for this connection. See the Technical Information section for the RS232 serial communication protocol. 110-471 5 Plumbing Process Piping 7720 N. Lehigh Avenue Niles, IL 60714-3491 Toll-free 888-828-7387 Telephone 847-966-2260 Fax 847-966-9358 thermalcare.com Manufacturer reserves the right to change specifications and design without notice or obligation. Thermal Care, Inc. is a registered trademark of MFRI, Inc. Printed in USA. Form 2-235.1 2) Clean the chiller strainer 3) Have a service technician adjust or replace the TX valve Drake part number D80-110 4) Have a service technician electronic leak check the chiller and repair if necessary, then remove and re-weigh the refrigerant into the system Air-Cooled Portable Water Chiller 7.5 Tons Air-Cooled Water Chiller Overview Specifications Features Options Control Instrument Support Documents Retun to Portable Chillers M1-7.5A Image is typical. Actual unit appearance will vary according to specifications and options. - Air-Cooled Po

Comment

You need to be a member of My Teaching House to add comments!

Join My Teaching House

© 2024   Created by My Teaching House.   Powered by

Badges  |  Report an Issue  |  Terms of Service