Maximum portable chiller manual

adjusted with -1,5˚C to +1,5˚C maximum. Automatic overcharge shutdown: The chiller is equipped with an automatic overcharge shutdown safety feature. The chiller needs 3 minutes before it can be restarted after an automatic shutdown. The restart procedure will take about 1 minute. Automatic operation of the compressor: 2) Clean the chiller strainer 3) Have a service technician adjust or replace the TX valve Drake part number D80-110 4) Have a service technician electronic leak check the chiller and repair if necessary, then remove and re-weigh the refrigerant into the system Please keep this manual readily accessible to operation and service personnel to ensure you get the most out of our product. If you have any questions about this model, or have other thernial solution needs, do not hesitate to call our Sales department (603-539-3600) or the 24/7 Service department (603- 539-5005). Air-Cooled Portable Water Chiller 7.5 Tons Air-Cooled Water Chiller Overview Specifications Features Options Control Instrument Support Documents Retun to Portable Chillers M1-7.5A Image is typical. Actual unit appearance will vary according to specifications and options. - 1. All chillers are based on chilled water at 2.4 GPM/Ton and 90°F (32°C) ambient air. 2. Water-Cooled chillers based on 85°F (29°C) condensing water at 3 GPM/Ton. 3. Scroll compressors except .5 to 1.5 Ton are reciprocating. * Water-Cooled chiller dimensions and weights are the same or smaller than Air-Cooled models. and maintain. Choose the Conair Series 1 Portable Chillers based on the cooling load and the capacity of the unit. Pick your Conair Series 1 Portable Chillers based on: Cooling load Choose a portable chiller that has 20% more capacity than the process load. Location Choose a water-cooled model if the unit will be located in an air-conditioned area. Chillers 3HP and up are not available outside of the United States. 1.5 HP High Capacity Chillers. 3HP High Capacity Chillers. Key Specifications. Working Temperature: +5° to +35°C Temperature Stability: ±0.5°C Cooling Capacity: Up to 10,936 watts @ 20°C. Key Features • Chillers 3HP and up are not available outside of the United States Warranty 5 year parts on standard controller, lifetime $175 exchange 3 year parts on the optional premium PLC controller 18 months parts on entire unit 1 year labor Based on $0.10/kWHr power cost Variable-Speed Compressor Options Chillers usually operate with process heat loads less than 100% of available chiller capacity. The maximum communications distance for Chillers equipped with the RS232 option is 15 meters (50 feet). A 9-pin D-connector is provided on the rear of the instrument enclosure for this connection. See the Technical Information section for the RS232 serial communication protocol. 110-471 5 Plumbing Process Piping 4 to 40 ton NQ Series industrial portable chillers use components such as scroll compressors, microchannel condensers, low noise fans, stainless steel brazed plate evaporators, and NQ Series PLC controls with large color touch screens to provide the best available technologies for the ultimate performance and reliability in a chiller package. Maximum Series Air-Cooled Portable Water Chiller: High Capacity Recirculating Chillers Thermal - Liquid Cooling, Heating Portable Gas Chillers - Mechanical and Cryogenic Industrial Chillers - Water Cooled Part Number: M1-.75A: ATS2602-ND: TWEevo Tech: Supplier: Advantage Engineering, In